.gif)
Carbon Fiber Mounting Plate for Fingertech Mega Spark
Each set includes two plates, eight M2 x 5mm and eight #4 x 5/16" Plastite screws. Enough to mount two motors.
The plates are Machined from from 0.060" Carbon Fiber to allow you to fit a Fingertech brushless Mega Spark motor/gearbox to a Kitbots Weta kit or your own chassis design.
FingerTech
Screws secure the plate to the motor (loctite recommended) and the four #4 Plastite screws are used to mount the plate to your chassis. All you need to mount the motor to your chassis is cut a hole big enough for the motor body and four pilot holes for the #4 screws.
The mounts weigh 0.15 oz (3.5g) each or 0.3 oz a pair (7g) including all screws.
Drawing of the Mounting plate
The plates are Machined from from 0.060" Carbon Fiber to allow you to fit a Fingertech brushless Mega Spark motor/gearbox to a Kitbots Weta kit or your own chassis design.
FingerTech
Screws secure the plate to the motor (loctite recommended) and the four #4 Plastite screws are used to mount the plate to your chassis. All you need to mount the motor to your chassis is cut a hole big enough for the motor body and four pilot holes for the #4 screws.
The mounts weigh 0.15 oz (3.5g) each or 0.3 oz a pair (7g) including all screws.
Drawing of the Mounting plate
Click To Enlarge
- Item #: FTBMMP
